Live Victron VRM energy-flow dashboard on the ESP32-2432S028R (Cheap Yellow Display)
Service to use Janitza Meters with Venus OS
Auto-discovery bridge that exposes every EVCC loadpoint as its own EV charger on Victron Venus OS (Cerbo GX), with an optional VRM web-UI tunnel and a guided installer.
Two-Pi distributed dry-contact relay controller. Master handles logic, web UI, scheduling, notifications; remote slave drives the relay with an independent failsafe. Generic 2-wire input/output works for generator start/stop, pumps, valves, fans, irrigation, anything switched by a relay.
ESPHome firmware that emulates the Huawei DTSU666-H Smart Power Sensor for SUN2000 inverters, fed from a Victron Cerbo GX — built-in export limitation without a physical meter.
Integrate EVCC loadpoints into Victron Venus OS as native EV chargers for real-time monitoring in the GUI and VRM portal.
Per-module Pylontech BMS monitoring for Victron Cerbo GX / Venus OS over RS232, with a Node-RED dashboard.
Convert Victron SmartShunts into virtual BMS devices with dynamic charge control
victron preditive based charging pure python without nodered
Emporia Vue submeter channels as individual Victron D-Bus AC loads for Venus OS — Home Assistant WebSocket power data via com.victronenergy.acload services
Policy engine with approval gates for Venus OS — SOC limits, charge/discharge rules, inverter control policies with audit logging via dbus-event-log
Reference implementations for common Venus OS integrations — MQTT↔D-Bus bridges, HTTP API wrappers, scheduled control, Home Assistant automations
Add a description, image, and links to the cerbo-gx topic page so that developers can more easily learn about it.
To associate your repository with the cerbo-gx topic, visit your repo's landing page and select "manage topics."