docs: Add Deploy a Pod page documenting On-Demand and Deploy When Available flows

get-started.mdx

@@ -21,22 +21,165 @@ Start by creating a Runpod account:
 Now that you've created your account, you're ready to deploy your first Pod:
 
 <Tabs>
-<Tab title="Web">
+<Tab title="Deploy via the console">
 
-1. Open the [Pods page](https://www.console.runpod.io/pods) in the web interface.
-2. Click the **Deploy** button.
-3. Select **A40** from the list of graphics cards (or any other GPU that's available).
-4. In the field under **Pod Name**, enter the name **quickstart-pod**.
-5. Keep all other fields (Pod Template, GPU Count, and Instance Pricing) on their default settings.
-6. Click **Deploy On-Demand** to deploy and start your Pod. You'll be redirected back to the Pods page after a few seconds.
+Use this path to launch a Pod from the console. Configure your workload, choose a region and GPU, review the pricing, and deploy.
 
-<Note>
-If you haven't set up payments yet, you'll be prompted to add a payment method and purchase credits for your account.
-</Note>
+Runpod is rolling out an updated deployment flow through [early access](https://console.runpod.io/user/early-access). Use the tabs below to follow the version that matches what you see in the console.
+
+<Tabs>
+<Tab title="Early access flow">
+
+<Warning>
+These instructions describe the early access version of the deployment flow. If you don't see this flow, follow the **Legacy flow** tab, or enable the new flow from [Account → Early access](https://console.runpod.io/user/early-access).
+</Warning>
+
+<Steps>
+  <Step title="Configure your workload">
+    In the **Workload** panel on the left:
+
+    - **Template**: select the container image your Pod will run. Use the search box to find a template, or click **Explore all** to browse. The selected template and its image appear below the search bar. Click **Set overrides** to customize environment variables, exposed ports, or container start commands without editing the template itself.
+    - **Pod name**: a name is auto-generated. You can replace it with any name you prefer.
+    - **Options**: when you select an [official Runpod template](/pods/templates/overview), two extra options appear. These options are not shown for community templates.
+      - **Start Jupyter notebook**: launches a Jupyter server when the Pod starts, accessible from the console. Enabled by default.
+      - **SSH terminal access**: enables SSH into the Pod. If enabled, paste your SSH public key in the field that appears. [Learn how to create an SSH key](/pods/configuration/use-ssh).
+  </Step>
+
+  <Step title="Choose a region">
+    Set the **Region** for your Pod. It's set to **Any region** by default. Click to restrict deployment to a specific geographic region.
+  </Step>
+
+  <Step title="Select a GPU">
+    In the **Compute** panel, choose a GPU from one of four tabs:
+
+    - **Available**: shows only GPUs with capacity right now.
+    - **Recommended**: shows GPUs recommended by Runpod and by the template maintainer.
+    - **All**: shows all GPUs, including those that are out of capacity and those marked incompatible by the template.
+    - **Recent**: shows all GPUs you've deployed in the last 7 days.
+
+    Use the search box, **Network volume** filter, **Filter** button, or **Sort by** dropdown to narrow the list. Click **Compare GPUs** to ask the Runpod assistant for a comparison of the selected GPUs.
+
+    The **Network volume** filter narrows the GPU list to compatible GPUs by filtering for GPUs that are in the same data center as the selected network volume. Select any network volume, and GPU availability updates to match it. GPUs that aren't compatible with the selected volume move to the incompatible section of the **All** tab.
+
+    If the GPU you want shows **Out of capacity**, you can still select it and deploy it once capacity frees up. Selecting an out-of-capacity GPU changes the final [Deploy](#deploy) step: instead of deploying right away, you can subscribe to deploy when the GPU becomes available.
+  </Step>
+
+  <Step title="Configure storage">
+    Pods offer two kinds of storage.
+
+    **Container disk**
+
+    This is the container's primary storage, and it's wiped whenever the Pod is stopped.
+
+    **Persistent storage**
+
+    Persistent storage keeps your data across stops and restarts, and you can mount it at any location. It's mounted at `/workspace` by default, but you can change this with a template override, or the template itself can set a different default. It comes in two types, and you can attach one or the other but not both:
+
+    - **Volume disk**: a disk attached directly to your Pod that keeps its data across stops and restarts but is deleted when the Pod is terminated.
+    - **Network volume**: permanent storage that exists independently of any Pod, so you can attach the same volume to different Pods over time.
+
+    If you did select a network volume in the **Compute** step, the persistent storage selection in this step is locked to that network volume.
+
+    GPUs that aren't compatible with any network volume have volume disk selected automatically, and you can't select a network volume for them.
+
+    For a full comparison, see [Storage options](/pods/storage/types).
+  </Step>
+
+  <Step title="Review the pricing summary">
+    The **Summary** panel on the right shows:
+
+    - The selected template and GPU.
+    - Total cost per hour (billed per millisecond).
+    - A breakdown of GPU cost, container disk cost, persistent storage cost, and stopped cost.
+
+    Verify the configuration looks correct before deploying.
+  </Step>
+
+  <Step title="Deploy" id="deploy">
+    <Tabs>
+    <Tab title="Deploy available Pod">
+
+    Click **Deploy Pod** to launch your Pod.
+
+    Your Pod appears under **Pods** in the left sidebar. It may take a moment to reach the running state while the container image is pulled.
+
+    <Note>
+    If you haven't set up payments yet, you'll be prompted to add a payment method and purchase credits for your account.
+    </Note>
+
+    </Tab>
+
+    <Tab title="Deploy when available">
+
+    If you selected an out-of-capacity GPU, the **Summary** panel shows **Instance not available** and a **Deploy when available** button in place of **Deploy Pod**. Runpod queues your Pod and deploys it automatically as soon as that GPU frees up within the time window you choose.
+
+    <Steps>
+      <Step title="Click Deploy when available">
+        In the right panel, click the **Deploy when available** button to open the subscription modal.
+      </Step>
+
+      <Step title="Set your subscription options">
+        In the **Deploy when available** modal:
+
+        - **Notifications**: choose how you want to be notified when your Pod deploys:
+          - **Email**: sends a notification to one of your account's email addresses. Select which address to use. If you're a member of a team, you can also select the team's email address.
+          - **In-console notification**: shows an alert inside the Runpod console.
+
+          Both are enabled by default.
+        - **Subscription window**: set the time range during which Runpod monitors for availability and auto-deploys your Pod:
+          - The default window is 24 hours from now.
+          - Click the date range to adjust the start and end time.
+          - Check **Use advanced scheduler** to fine-tune the hours when Runpod can deploy your request, rather than monitoring continuously across the entire window.
+      </Step>
+
+      <Step title="Subscribe">
+        Click **Subscribe** to confirm. Runpod monitors for availability and deploys your Pod automatically when the selected GPU becomes free within your subscription window.
+
+        You'll receive a notification (via email or in-console, depending on your settings) when the Pod has been deployed.
+
+        <Warning>
+        If you don't have enough funds available when the GPU becomes available, your deploy when available subscription fails and no Pod is deployed. To retry, you'll need to subscribe again.
+        </Warning>
+
+        <Tip>
+        If the GPU doesn't become available within your subscription window, your subscription expires and no Pod is deployed. You can create a new subscription at any time.
+        </Tip>
+      </Step>
+    </Steps>
+
+    </Tab>
+    </Tabs>
+  </Step>
+</Steps>
 
 </Tab>
 
-<Tab title="Terminal">
+<Tab title="Legacy flow">
+
+<Steps>
+  <Step title="Select a GPU">
+    Select a GPU from the list of graphics cards.
+  </Step>
+
+  <Step title="Select a template">
+    Select the template you want to use. To customize environment variables, exposed ports, or container start commands, click **Edit** to set template overrides.
+  </Step>
+
+  <Step title="Deploy">
+    Click **Deploy On-Demand** to deploy and start your Pod. You'll be redirected back to the Pods page after a few seconds.
+
+    <Note>
+    If you haven't set up payments yet, you'll be prompted to add a payment method and purchase credits for your account.
+    </Note>
+  </Step>
+</Steps>
+
+</Tab>
+</Tabs>
+
+</Tab>
+
+<Tab title="Deploy via the CLI">
 
 First, install the [Runpod CLI](/runpodctl/overview) on your local machine and configure it with your API key: