HyperSerialPico/.github/workflows/push-master.yml at 5fdd05f77808ad80c76d6118a0206dd90bbd640e · awawa-dev/HyperSerialPico · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
name: HyperSerialPico CI Build

on: [push]

jobs:

###########################
#### HyperSerialPico ######
###########################

  HyperSerialPico:
    runs-on: ubuntu-24.04

    steps:
    - uses: actions/checkout@v6.0.2
      with:
        submodules: recursive

    - name: Install GNU Arm Embedded Toolchain
      uses: carlosperate/arm-none-eabi-gcc-action@v1
      with:
        release: '14.2.Rel1'

    - name: Build packages
      shell: bash
      run: |
        mkdir build
        cd build
        cmake ..
        cmake --build . --config Release

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release)
      with:
        name: firmware-release-generic-RP2040
        path: |
          firmware/*.uf2

    - name: Build packages for generic RP2350
      shell: bash
      run: |
        cd build
        rm -rf *
        rm -rf ../firmware/*
        cmake -DTARGET_BOARD=pico2 -DCMAKE_BUILD_TYPE=Release ..
        cmake --build .
        zip -j ../firmware/firmware_generic_RP2350.zip ../firmware/*

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release generic RP2350)
      with:
        name: firmware-release-generic-RP2350
        archive: false
        path: |
          firmware/*.zip

    - name: Build packages for Adafruit Feather RP2040 Scorpio
      shell: bash
      run: |
        cd build
        rm -rf *
        rm -rf ../firmware/*
        echo "Neopixel is using GPIO16(OUTPUT_DATA_PIN) on output 0." > ../firmware/Pinout_for_Adafruit_Feather_RP2040_Scorpio.txt
        echo "SPI is using spi0 interface pins: GPIO19(OUTPUT_SPI_DATA_PIN) and GPIO18(OUTPUT_SPI_CLOCK_PIN) on output 3 and 2 respectively." >> ../firmware/Pinout_for_Adafruit_Feather_RP2040_Scorpio.txt
        cmake -DOVERRIDE_BOOT_WORKAROUND=ON -DOVERRIDE_DATA_PIN=16 -DOVERRIDE_SPI_DATA_PIN=19 -DOVERRIDE_SPI_CLOCK_PIN=18 -DCMAKE_BUILD_TYPE=Release ..
        cmake --build .
        zip -j ../firmware/Adafruit_Feather_RP2040_Scorpio.zip ../firmware/*

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release for Adafruit_Feather_RP2040)
      with:
        name: firmware-release-adafruit-scorpio-RP2040
        archive: false
        path: |
          firmware/*.zip

    - name: Build packages for Adafruit ItsyBitsy RP2040
      shell: bash
      run: |
        cd build
        rm -rf *
        rm -rf ../firmware/*
        echo "Neopixel is using GPIO14(OUTPUT_DATA_PIN) on output 5." > ../firmware/Pinout_for_Adafruit_ItsyBitsy_RP2040.txt
        cmake -DOVERRIDE_BOOT_WORKAROUND=ON -DOVERRIDE_DATA_PIN=14 -DCMAKE_BUILD_TYPE=Release ..
        cmake --build .
        rm ../firmware/*_Spi.uf2
        rm ../firmware/*_ws2801.uf2
        zip -j ../firmware/Adafruit_ItsyBitsy_RP2040.zip ../firmware/*

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release for Adafruit_ItsyBitsy_RP2040)
      with:
        name: firmware-release-adafruit-itsybitsy-RP2040
        archive: false
        path: |
          firmware/*.zip

    - name: Build packages for Pimoroni Plasma Stick RP2040 W
      shell: bash
      run: |
        cd build
        rm -rf *
        rm -rf ../firmware/*
        echo "Neopixel is using GPIO15(OUTPUT_DATA_PIN) on output PIXELS." > ../firmware/Pinout_for_Pimoroni_Plasma_Stick_RP2040_W.txt
        cmake -DOVERRIDE_DATA_PIN=15 -DCMAKE_BUILD_TYPE=Release ..
        cmake --build .
        rm ../firmware/*_Spi.uf2
        rm ../firmware/*_ws2801.uf2
        zip -j ../firmware/Pimoroni_Plasma_Stick_RP2040_W.zip ../firmware/*

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release for Pimoroni_Plasma_Stick_RP2040_W)
      with:
        name: firmware-release-pimoroni-plasma-stick-RP2040-W
        archive: false
        path: |
          firmware/*.zip

    - name: Build packages for Pimoroni Plasma 2040
      shell: bash
      run: |
        cd build
        rm -rf *
        rm -rf ../firmware/*
        echo "Neopixel is using GPIO15(OUTPUT_DATA_PIN) on output DA." > ../firmware/Pinout_for_Pimoroni_Plasma_RP2040.txt
        echo "SPI is using spi1 interface pins: GPIO15(OUTPUT_SPI_DATA_PIN) and GPIO14(OUTPUT_SPI_CLOCK_PIN) on output DA and CL respectively." >> ../firmware/Pinout_for_Pimoroni_Plasma_RP2040.txt
        cmake -DOVERRIDE_DATA_PIN=15 -DOVERRIDE_SPI_INTERFACE=spi1 -DOVERRIDE_SPI_DATA_PIN=15 -DOVERRIDE_SPI_CLOCK_PIN=14 -DCMAKE_BUILD_TYPE=Release ..
        cmake --build .
        zip -j ../firmware/Pimoroni_Plasma_RP2040.zip ../firmware/*

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release for Pimoroni_Plasma_RP2040)
      with:
        name: firmware-release-pimoroni-plasma-RP2040
        archive: false
        path: |
          firmware/*.zip

    - name: Build packages for Pimoroni Plasma RP2350
      shell: bash
      run: |
        cd build
        rm -rf *
        rm -rf ../firmware/*
        echo "Neopixel is using GPIO15(OUTPUT_DATA_PIN) on output DA." > ../firmware/Pinout_for_Pimoroni_Plasma_RP2350.txt
        echo "SPI is using spi1 interface pins: GPIO15(OUTPUT_SPI_DATA_PIN) and GPIO14(OUTPUT_SPI_CLOCK_PIN) on output DA and CL respectively." >> ../firmware/Pinout_for_Pimoroni_Plasma_RP2350.txt
        cmake -DTARGET_BOARD=pimoroni_plasma2350 -DOVERRIDE_DATA_PIN=15 -DOVERRIDE_SPI_INTERFACE=spi1 -DOVERRIDE_SPI_DATA_PIN=15 -DOVERRIDE_SPI_CLOCK_PIN=14 -DCMAKE_BUILD_TYPE=Release ..
        cmake --build .
        zip -j ../firmware/Pimoroni_Plasma_RP2350.zip ../firmware/*

    - uses: actions/upload-artifact@v7.0.0
      name: Upload artifacts (release for Pimoroni_Plasma_RP2350)
      with:
        name: firmware-release-pimoroni-plasma-RP2350
        archive: false
        path: |
          firmware/*.zip

################################
###### Publish Releases ########
################################

  publish:
    name: Publish Releases
    if: startsWith(github.event.ref, 'refs/tags')
    needs: [HyperSerialPico]
    runs-on: ubuntu-24.04
    permissions:
      contents: write
    steps:
      # generate environment variables
      - name: Generate environment variables from version and tag
        run: |
          echo "TAG=${GITHUB_REF/refs\/tags\//}" >> $GITHUB_ENV
          echo "preRelease=false" >> $GITHUB_ENV

      # If version contains alpha or beta, mark draft release as pre-release
      - name: Mark release as pre-release
        if: contains(env.VERSION, 'alpha') || contains(env.VERSION, 'beta')
        run: echo "preRelease=true" >> $GITHUB_ENV

      - uses: actions/download-artifact@v8.0.0
        with:
          pattern: firmware-release-*
          merge-multiple: true

      # create draft release and upload artifacts
      - name: Create draft release
        uses: softprops/action-gh-release@v2.5.0
        with:
          name: HyperSerialPico ${{ env.VERSION }}
          tag_name: ${{ env.TAG }}
          files: |
            *.uf2
            *.zip
          draft: true
          prerelease: ${{ env.preRelease }}
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}