Changing Input (Controller Pak/Rumble Pak)

[drakecaiman]

Some games (like Chameleon Twist) will display an error on startup because it is expecting a Rumble Pak:

Is there currently a way to tell this core that a Rumble Pak is in the controller?

macOS Sierra 10.12.2
OpenEmu 2.04
Mupen64Plus 2.5.2

[clobber]

I'll fix this with a workaround, but just so you are aware Revision A/Version 1.1 ROM boots fine.

[drakecaiman]

Thanks for the update!

[ssokolow]

@clobber Good to know, but not necessarily a solution since some users prefer to use the ROMs they dumped from the cartridges they own using a Retrode.

(Disclaimer: I'm a Linux Mupen64Plus user who stumbled across this issue thread while looking up how to resolve this problem on Linux.)

EDIT: In case anyone lands here while looking for a Linux fix, you have to go into mupen64plus.cfg and set mode = 0 (Fully manual) and plugin = 1 for all four [Input-SDL-Control_] blocks.

• Using the "Mempak switch" or "Rumblepak switch" keybindings ASAP doesn't work.
• mode = 2 (Fully automatic) causes it to revert whatever changes you make as part of Mupen64Plus startup.
• mode = 1 (Auto with named SDL Device) will probably also revert your changes on startup, but I didn't test that.
• Despite only having one physical controller connected, Mupen4Plus's rules for pads 2 through 4 still have an effect in this situation. (You'd think that "Fully Automatic" would set plugged = False for controller 2 through 4 if there's no hardware present, but it doesn't seem to.)

Another thing I didn't think to test was whether setting plugged = False on controllers 2 through 4 was exempt from "mode = 2 resets everything" and whether doing so would avoid the need to set mode = 0 and plugin = 1 on them.