remove UDP port for VXLAN frames

Author: cumulusAnia

content/cumulus-linux-50/System-Configuration/NVIDIA-User-Experience-NVUE.md

@@ -314,7 +314,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set evpn`<br>`nv unset evpn` | Configures EVPN. This is where you enable and disable the EVPN control plane, and set EVPN route advertise, multihoming, and duplicate address detection options. |
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the switch interfaces. Use this command to configure bond interfaces, bridge interfaces, interface IP addresses, interface descriptions, VLAN IDs, and links (MTU, FEC, speed, duplex, and so on).|
 | `nv set mlag`<br>`nv unset mlag` | Configures MLAG. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform` | Configures hardware component options. |
 | `nv set qos`<br>`nv unset qos` | Configures QoS RoCE. |
 | `nv set router`<br>`nv unset router` | Configures router policies (prefix list rules and route maps), sets global BGP options (enable and disable, ASN and router ID, BGP graceful restart and shutdown), global OSPF options (enable and disable, router ID, and OSPF timers) PIM, IGMP, PBR, VRR, and VRRP. |

content/cumulus-linux-51/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -73,7 +73,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set evpn`<br>`nv unset evpn` | Configures EVPN. This is where you enable and disable the EVPN control plane, and set EVPN route advertise, multihoming, and duplicate address detection options. |
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the switch interfaces. Use this command to configure bond interfaces, bridge interfaces, interface IP addresses, interface descriptions, VLAN IDs, and links (MTU, FEC, speed, duplex, and so on).|
 | `nv set mlag`<br>`nv unset mlag` | Configures MLAG. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform` | Configures hardware component options. |
 | `nv set qos`<br>`nv unset qos` | Configures QoS RoCE. |
 | `nv set router`<br>`nv unset router` | Configures router policies (prefix list rules and route maps), sets global BGP options (enable and disable, ASN and router ID, BGP graceful restart and shutdown), global OSPF options (enable and disable, router ID, and OSPF timers) PIM, IGMP, PBR, VRR, and VRRP. |

content/cumulus-linux-510/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -117,7 +117,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set evpn`<br>`nv unset evpn` | Configures EVPN. This is where you enable and disable the EVPN control plane, and set EVPN route advertise, multihoming, and duplicate address detection options. |
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the switch interfaces. Use this command to configure bond and bridge interfaces, interface IP addresses and descriptions, VLAN IDs, and links (MTU, FEC, speed, duplex, and so on).|
 | `nv set mlag`<br>`nv unset mlag` | Configures MLAG. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform`|  Configures Pulse per Second; the simplest form of synchronization for the physical hardware clock.|
 | `nv set qos`<br>`nv unset qos` | Configures QoS RoCE. |
 | `nv set router`<br>`nv unset router` | Configures router policies (prefix list rules and route maps), sets global BGP options (enable and disable, ASN and router ID, BGP graceful restart and shutdown), global OSPF options (enable and disable, router ID, and OSPF timers) PIM, IGMP, PBR, VRR, and VRRP. |

content/cumulus-linux-511/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -117,7 +117,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set evpn`<br>`nv unset evpn` | Configures EVPN. This is where you enable and disable the EVPN control plane, and set EVPN route advertise, multihoming, and duplicate address detection options. |
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the switch interfaces. Use this command to configure bond and bridge interfaces, interface IP addresses and descriptions, VLAN IDs, and links (MTU, FEC, speed, duplex, and so on).|
 | `nv set mlag`<br>`nv unset mlag` | Configures MLAG. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures network virtualization (VXLAN) settings. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform`|  Configures Pulse per Second; the simplest form of synchronization for the physical hardware clock.|
 | `nv set qos`<br>`nv unset qos` | Configures QoS RoCE. |
 | `nv set router`<br>`nv unset router` | Configures router policies (prefix list rules and route maps), sets global BGP options (enable and disable, ASN and router ID, BGP graceful restart and shutdown), global OSPF options (enable and disable, router ID, and OSPF timers) PIM, IGMP, PBR, VRR, and VRRP. |

content/cumulus-linux-512/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -117,7 +117,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set evpn`<br>`nv unset evpn` | Configures {{<link url="Basic-Configuration" text="EVPN">}}. This is where you enable and disable the EVPN control plane, and set EVPN route advertise, multihoming, and duplicate address detection options. |
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the {{<link url="Interface-Configuration-and-Management" text="switch interfaces">}}. Use this command to configure bond and bridge interfaces, interface IP addresses and descriptions, VLAN IDs, and {{<link url="Switch-Port-Attributes" text="links (MTU, FEC, speed, duplex, and so on)">}}.|
 | `nv set mlag`<br>`nv unset mlag` | Configures {{<link url="Multi-Chassis-Link-Aggregation-MLAG" text="MLAG">}}. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform`|  Configures {{<link url="Pulse-Per-Second-PPS" text="Pulse per Second">}}; the simplest form of synchronization for the physical hardware clock.|
 | `nv set qos`<br>`nv unset qos` | Configures {{<link title="RDMA over Converged Ethernet - RoCE" text="QoS RoCE">}}. |
 | `nv set router`<br>`nv unset router` | Configures {{<link url="Route-Filtering-and-Redistribution" text="router policies">}} (prefix list rules and route maps), sets {{<link url="Basic-BGP-Configuration" text="global BGP options">}} (enable and disable, ASN and router ID, BGP graceful restart and shutdown), {{<link url="Open-Shortest-Path-First-v2-OSPFv2" text="global OSPF options">}} (enable and disable, router ID, and OSPF timers) {{<link url="Protocol-Independent-Multicast-PIM" text="PIM">}}, {{<link url="IGMP-and-MLD-Snooping" text="IGMP">}}, {{<link url="Policy-based-Routing" text="PBR">}}, {{<link url="Virtual-Router-Redundancy-VRR" text="VRR">}}, and {{<link url="Virtual-Router-Redundancy-Protocol-VRRP" text="VRRP">}}. |

content/cumulus-linux-513/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -118,7 +118,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the {{<link url="Interface-Configuration-and-Management" text="switch interfaces">}}. Use this command to configure bond and bridge interfaces, interface IP addresses and descriptions, VLAN IDs, and {{<link url="Switch-Port-Attributes" text="links (MTU, FEC, speed, duplex, and so on)">}}.|
 | `nv set maintenance`<br>`nv unset maintenance`| Configures maintenance mode so you can take a switch out of production to perform updates or troubleshoot issues.|
 | `nv set mlag`<br>`nv unset mlag` | Configures {{<link url="Multi-Chassis-Link-Aggregation-MLAG" text="MLAG">}}. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform`|  Configures {{<link url="Pulse-Per-Second-PPS" text="Pulse per Second">}}; the simplest form of synchronization for the physical hardware clock.|
 | `nv set qos`<br>`nv unset qos` | Configures {{<link title="RDMA over Converged Ethernet - RoCE" text="QoS RoCE">}}. |
 | `nv set router`<br>`nv unset router` | Configures {{<link url="Route-Filtering-and-Redistribution" text="router policies">}} (prefix list rules and route maps), sets {{<link url="Basic-BGP-Configuration" text="global BGP options">}} (enable and disable, ASN and router ID, BGP graceful restart and shutdown), {{<link url="Open-Shortest-Path-First-v2-OSPFv2" text="global OSPF options">}} (enable and disable, router ID, and OSPF timers) {{<link url="Protocol-Independent-Multicast-PIM" text="PIM">}}, {{<link url="IGMP-and-MLD-Snooping" text="IGMP">}}, {{<link url="Policy-based-Routing" text="PBR">}}, {{<link url="Virtual-Router-Redundancy-VRR" text="VRR">}}, and {{<link url="Virtual-Router-Redundancy-Protocol-VRRP" text="VRRP">}}. |

content/cumulus-linux-514/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -118,7 +118,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the {{<link url="Interface-Configuration-and-Management" text="switch interfaces">}}. Use this command to configure bond and bridge interfaces, interface IP addresses and descriptions, VLAN IDs, and {{<link url="Switch-Port-Attributes" text="links (MTU, FEC, speed, duplex, and so on)">}}.|
 | `nv set maintenance`<br>`nv unset maintenance`| Configures maintenance mode so you can take a switch out of production to perform updates or troubleshoot issues.|
 | `nv set mlag`<br>`nv unset mlag` | Configures {{<link url="Multi-Chassis-Link-Aggregation-MLAG" text="MLAG">}}. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform`|  Configures {{<link url="Pulse-Per-Second-PPS" text="Pulse per Second">}}; the simplest form of synchronization for the physical hardware clock.|
 | `nv set qos`<br>`nv unset qos` | Configures {{<link title="RDMA over Converged Ethernet - RoCE" text="QoS RoCE">}}. |
 | `nv set router`<br>`nv unset router` | Configures {{<link url="Route-Filtering-and-Redistribution" text="router policies">}} (prefix list rules and route maps), sets {{<link url="Basic-BGP-Configuration" text="global BGP options">}} (enable and disable, ASN and router ID, BGP graceful restart and shutdown), {{<link url="Open-Shortest-Path-First-v2-OSPFv2" text="global OSPF options">}} (enable and disable, router ID, and OSPF timers) {{<link url="Protocol-Independent-Multicast-PIM" text="PIM">}}, {{<link url="IGMP-and-MLD-Snooping" text="IGMP">}}, {{<link url="Policy-based-Routing" text="PBR">}}, {{<link url="Virtual-Router-Redundancy-VRR" text="VRR">}}, and {{<link url="Virtual-Router-Redundancy-Protocol-VRRP" text="VRRP">}}. |

content/cumulus-linux-515/System-Configuration/NVIDIA-User-Experience-NVUE/NVUE-CLI.md

@@ -118,7 +118,7 @@ The `nv set` and `nv unset` commands are in the following categories. Each comma
 | `nv set interface <interface-id>`<br>`nv unset interface <interface-id>` | Configures the {{<link url="Interface-Configuration-and-Management" text="switch interfaces">}}. Use this command to configure bond and bridge interfaces, interface IP addresses and descriptions, VLAN IDs, and {{<link url="Switch-Port-Attributes" text="links (MTU, FEC, speed, duplex, and so on)">}}.|
 | `nv set maintenance`<br>`nv unset maintenance`| Configures maintenance mode so you can take a switch out of production to perform updates or troubleshoot issues.|
 | `nv set mlag`<br>`nv unset mlag` | Configures {{<link url="Multi-Chassis-Link-Aggregation-MLAG" text="MLAG">}}. This is where you configure the backup IP address or interface, MLAG system MAC address, peer IP address, MLAG priority, and the delay before bonds come up. |
-| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you configure the UDP port for VXLAN frames, control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
+| `nv set nve`<br>`nv unset nve` | Configures {{<link url="Network-Virtualization" text="network virtualization (VXLAN) settings">}}. This is where you control dynamic MAC learning over VXLAN tunnels, enable and disable ARP and ND suppression, and configure how Cumulus Linux handles BUM traffic in the overlay.|
 | `nv set platform`<br>`nv unset platform`|  Configures {{<link url="Pulse-Per-Second-PPS" text="Pulse per Second">}}; the simplest form of synchronization for the physical hardware clock.|
 | `nv set qos`<br>`nv unset qos` | Configures {{<link title="RDMA over Converged Ethernet - RoCE" text="QoS RoCE">}}. |
 | `nv set router`<br>`nv unset router` | Configures {{<link url="Route-Filtering-and-Redistribution" text="router policies">}} (prefix list rules and route maps), sets {{<link url="Basic-BGP-Configuration" text="global BGP options">}} (enable and disable, ASN and router ID, BGP graceful restart and shutdown), {{<link url="Open-Shortest-Path-First-v2-OSPFv2" text="global OSPF options">}} (enable and disable, router ID, and OSPF timers) {{<link url="Protocol-Independent-Multicast-PIM" text="PIM">}}, {{<link url="IGMP-and-MLD-Snooping" text="IGMP">}}, {{<link url="Policy-based-Routing" text="PBR">}}, {{<link url="Virtual-Router-Redundancy-VRR" text="VRR">}}, and {{<link url="Virtual-Router-Redundancy-Protocol-VRRP" text="VRRP">}}. |